Deluxe Multipurpose Fall Arrest Harness – ZERO

HR004

The ZERO Plus Tradesman Harness with positioning belt

$438.33

Category:
Description

Description

The ZERO Plus Tradesman Harness with positioning belt provides all the comfort and benefits of ZERO Plus range. This popular harness is ideal for construction work, roofers, vertical climbing as well as general purpose and fall arrest.

Breathable mesh fabric in the shoulder and leg pads gives the wearer support and comfort while helping to keep them cooler and dryer. Doesn’t tangle easily, making it quick to put on.

  • Quick connect buckles
  • Front and rear fall arrest D-ring attachment points
  • Offset work positioning side attachment points
  • Padded shoulder and leg straps
  • Fall indicators for continued safety
  • Velcro covered labelling for long term inspections
  • Water & oil resistant
  • Tool loops
  • 136kg rated

 

Additional information

Additional information

Harness Assembly

Rated to 136kg (for use with standard fall arrest lanyard)
Material – manufactured from polyester webbing
Weight – 1.3kg (includes all buckles and D-rings)
Karabiners

Load rating – 23kN
Material – manufactured from high tensile steel, zinc plated
Weight – 0.6kg
Working Load Limit

All ZERO fall arrest harness gear is rated over 100kg and is designed for a maximum free fall of 2000mm. An energy absorber is to be incorporated as a safety factor whenever a fall arrest situation is encountered.
Compliance

ZERO harness gear and equipment is designed and manufactured in accordance with requirements of Australian and New Zealand Standards AS/NZS 1891.1:2007, CE. EN361 and relevant statutory OHS codes of practice guidelines.
Testing

ZERO equipment is manufactured and tested to conform to International and Internal Standards and quality controlled according to ISO9001:2008. Copies of test certificates are available.
Product Warranty

3 years from date of purchase subject to correct use and maintenance in accordance with manufacturer’s specifications and recommendations.
Inspection & Maintenance

Inspection and certification required every 6 months by a competent height safety equipment inspector in accordance with manufacturers specifications and requirements of Australian Standards AS/NZS 1891.1.
Reviews (0)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.