Description

The ZERO ABM-2T5E, 2.0M fall arrest lanyard with integrated energy absorber made from wide polyamide tubular webbing and special woven polyester fabric webbing inside, which holds the stock absorbing qualities. The internal woven component acts in the same way as a typical shock pack, tearing on impact and reducing the forces in the event of a fall.

Additional information

Lanyard Assembly	Load rating – 136kg Material – manufactured from polyester webbing Weight – 1.3kg (includes all buckles and D-rings)
Working Load Limit	All ZERO fall arrest harness gear is rated over 100kg and is designed for a maximum free fall of 2000mm. An energy absorber is to be incorporated as a safety factor whenever a fall arrest situation is encountered.
Compliance	ZERO harness gear and equipment is designed and manufactured in accordance with requirements of Australian and New Zealand Standards AS/NZS 1891.1:2007, CE. EN361 and relevant statutory OHS codes of practice guidelines.
Testing	ZERO equipment is manufactured and tested to conform to International and Internal Standards and quality controlled according to ISO9001:2008. Copies of test certificates are available.
Product Warranty	3 years from date of purchase subject to correct use and maintenance in accordance with manufacturer’s specifications and recommendations.
Inspection & Warranty	Inspection and certification required every 6 months by a competent height safety equipment inspector in accordance with manufacturers specifications and requirements of Australian Standards AS/NZS 1891.1.